Inadequate Preparation
A quality stain job starts with high performance surface preparation. Professional prep includes wood evaluation, anti-mildew pressure washing, deep cleaning using DeckWash or stripping agents, carpentry to replace worn wood, tarp coverage of plants/walk-ways, and final inspection. A simple cleaning with bleach and water is inadequate. The wood must be properly prepared to open the pores for a longer-lasting coating.

A Thin Application
Most deck stain applications don't make use of a deep penetrating stain that is worked into the wood. Poor jobs put a thin layer that stays on the surface. They wear off and require frequent re-coating. Using a Sealer and a Stain formulated with advanced resins assure a long-lasting finish that extends your wood's curb appeal long after conventional stains crack and deteriorate.

Taking Too Long
Many paint contractors are understaffed. They leave the current job to give bids, repair faulty jobs or finish touch-ups. Make sure your contractor is well-staffed and stays on your job.

Staining In Poor Weather
Staining when the wood substrate is wet or too hot can cause poor adhesion and blistering. Make sure your contractor doesn't give you an economy-rush job..

Sealer and Stain Quality
Decks are subject to weathering. Most Sealers or Stains require frequent re-coating to protect your wood investment. These conventional products stay on the surface and manufacturers design them to require frequent re-coating. Advanced Sealers and Stains are designed to extend your stain job finish.